iMagox™ is designed from the ground up to work in the MRI and deliver safe, reliable patient readings. The system is intended for use in MRIs with magnet strength from 0.2T to 3T, and is completely operational up to the 10,000 Gauss line. The iMagox™ System's large screen permits the patient's SpO2 waveform and data to be viewed from several meters away. Transport to and from the MRI is made easy with iMagox™ System, as the monitor is lightweight and can be easily attached to an existing IV pole or bedrail.
The iMagox™ System also uses a specially designed fiber optic SpO2 sensor that, when used with the Masimo™ SET technology, provides reliable SpO2 readings during conditions of low perfusion and/or patient movement. Unlike conventional SpO2 monitors, iMagox™ uses no wires to connect to the patient which have been known to cause serious patient burns, and the iMagox™ System is not attracted to the magnet like other standard SpO2 systems.
This combined with the system's extended battery operation makes the iMagox™ System a great choice for continuous patient monitoring before, during and after the scan. iMagox™ also provides an optional wireless remote display/control that does not require any installation and gives the operator complete visibility and control from outside the scanner room.
imagox non-magnetic spo2 monitor
The iMagox 2460 Pulse Oximeter System is a Masimo SET Technology based digital pulse oximeter for use in a Magnetic Resonance (MR) environment, up to and including 3T MR scanners. It simultaneously measures and displays the functional oxygen saturation of arterial hemoglobin (SpO2) and pulse rate of adult, pediatric and infant patients. The large display provides digital and waveform data with SpO2 alarms and user messages, which can be easily seen within the MR scanner room. Operating on battery power when fully charged, this system will provide up to 24 hours of continuous operation. The unique rear clamp mechanism swivels to allow mounting on either a non-magnetic IV pole, or for mounting to a bed side rail.
wireless mri control room display
The 2465 iMagox Wireless Remote Display allows for remote ability to contorl the Model 2460 MRI Pulse Oximeter from outside the MR scanner. It utilizes the same user interface as the 2460 Oximeter and will allow adjustment of all Oximeter parameters and resetting alarms. The large clear display shows all Oximeter informatoin at your desk top from the control room. The wireless remote also acts as a charger for backup of spare battery pack for the iMagox 2460 MRI Pulse Oximeter. It utilizes a wireless link at 2.4 GHz for easy installation with no image artifacts.
non-magnetic spo2 sensor
The MRI SpO2 Pulse Oximeter Sensor and Sensor Grip allow safe and convenient SpO2 monitoring in the MRI. The fiber optic based SpO2 sensor avoids potentially hazardous heating or image artifact during MR scans. The method of patient attachment uses a medical grade silicon rubber Sensor Grip or disposable adhesive grip that allows easy and convenient attachment to the patient's hand or foot, and accommodates pediatric, adult and infant patients with various size grips.
This product is ONly available for sale in japan
Request Info & Pricing
See if you quality for a discount on our wireless, non-magnetic MRI Pulse Oximeter System